Contact: Manager Cao
Address: Group 13, Xia Niu Village, Quliang Town, Xinmi City, Zhengzhou City, Henan Province
Professional steel wire grid plate : 1) The anchor bars (generally φ10, φ6.5, length 30d, spacing 400mm) pre-buried on the wall, beam, and column should be straightened and painted with anti-rust paint.
2) The ground, roof, concrete beams, columns, and walls are not provided with anchoring ribs. Expansion bolts can be buried at 400mm intervals or U-shaped connectors can be fixed with shot nails. Perforated inserts can also be used as connectors The method of .com is to drill holes on both sides of the wire mesh frame, the hole distance is 300mm, the hole diameter is 6mm, and the hole depth is 50mm. The two rows of holes should be staggered. The holes are inserted with φ6.5 steel bars, buried 50mm, and exposed 100mm. The ribs can be anchored without epoxy resin, the rest should be cleared first, and then the ribs should be anchored with epoxy resin.
3) Install the sandwich panel: Install the wire mesh sandwich panel according to the position of the pay-off. The joint between the panel and the panel is secured with a hoop code or No. 22 lead wire.
4) If anchor ribs are pre-buried on the walls, beams, and columns, use 22-gauge lead wire to tie the anchor ribs and the steel wire mesh frame firmly, and the buckle shall be no less than 3 points.
5) Fix the U-shaped connector with expansion bolts or with nails, and tie the U-shaped connector with the steel wire frame with No. 22 lead wire.
Powered by nestingTechnical support: Huaqi Yunhang
Sweep and pay attention